Termite Detection Systems, Inc.
P.O. Box 117
Oak Island, NC 28465
Phone: 910-933-4218

Procedure for filing Real Estate Closing Reports:

The TERMITE DETECTION SYSTEM consists of a carbon dioxide (CO2) portable detector attached to an air pump, which is combined with a filtered probe. The probe can be used to pierce the sheet rock wall on the inside of a building and the air pump draws out an air sample that is passed to the carbon dioxide detector. A passive reading is taken in the house first and used as a calibration. Any increase above the control reading indicates an active termite infestation. This system detects active termites only.

According to the NPMA, which oversees inspection policy with the Department of Housing and Urban Development, CO2 found in a living space is not and cannot be considered visible evidence of live insects as listed in the inspection form unless the insects are visually observed after detection by the CO2 termite detector through further investigation.

If the CO2 Termite detector indicates active termites in an area during the inspection and no other visible evidence is available, it is appropriate to put this information in the comment section of the form only.

The CO2 Termite Detector is a valuable tool to help inspectors get a feel for critical areas and potential Termite infestations and should be used as a guide to locate areas that need further investigation.

For additional information or to place an order, please call 910-933-4218, contact or email Termite Detection Systems Inc. Additional features include a charging status indicator, sensor failure indication, sensor test mode, AC/DC Chargers, rechargeable NiMH (nickel metal hydride) batteries, probe filters, and shock resistant carrying case.

TDS Videos